Megan Racing Blue EZII Series Coilover Springs Suspension Kit For Tesla 19+ Model Y AWD/17+ Model 3 AWD (Lower Set-up)

Megan Racing EZII Series coilover system is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.

Our EZII Series coilover system has been developed prioritizing ride comfort for those who are seeking to increase the vehicle’s exterior aesthetics while still retaining a nice ride. By using rubber front top mounts and OE factory rear mount, road noise is further insulated and kept away from the interior cabin. However with a slight increase of spring rates over stock and sport tuned shock valving, our kit is still more than capable enough for spirited driving or dare we even say track use.

Megan Racing EZII Series Suspension Systems are fully adjustable coilover systems which do not break the bank. With it’s full length adjustable design, the vehicle’s ride height can be adjusted without affecting the shock stroke ensuring a retained ride quality at nearly any height. Monotube internal shock construction separates the oil and hi pressured Nitrogen gas chamber preventing aeration. This allows for immediate shock response and damping consistency. 15-click damping force adjustability will also allow the user to fine tune the ride stiffness and response to his or her preference.

• Material: CNC Machined Steel and Aluminum Construction
• Color: Blue
• Finish: Anodized
• Style: EZII Series
• Full Length Adjustability, Adjustable Ride Height
• Monotube Internal Single Cylinder Construction
• 15-Levels of Damper Compression & Rebound Simultaneous. Non Adjustable Front Camber. Aluminum Brackets paired with rubber inserts
• Front Spring Rate: 10 kgf/mm
  Rear Spring Rate: 11 kgf/mm (Conservative Spring Rate)
• Rubber Insulated Front Top Mounts

Application:

For 2019+ Tesla Model Y AWD ONLY
For 2017+ Tesla Model 3 AWD ONLY (*for extra Lower Set-up)

Remark: This kit will also work with Model 3 AWD Models if you wanted to to have extra lowering to attain -20mm ride height. For General lowering setup please purchase Regular Model 3 AWD Kit Part# MR-CDK-TSL17X-EZII

Installation: Must Re-use Rear Factory Top Mounts

Product Content:

• 1 x Set of Coilover Springs Kit (2 Front + 2 Rear)

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

• MR-CDK-TSLY19X-EZII, MRCDKTSLY19XEZII

Do the Coilovers always come with Endlink?
Not all Coilover will include Endlink. During the R&D process, Megan will determine whether or not the factory Endlink is successful to be reused or required to provide a delicate Endlink for installation with Megan Coilover. Please confer with the product photo above.

Suggest Damper Level Of Adjustment:

LV 1-8: Suggested for track use.
LV 9-16: Suggested for mountain/aggressive use.
LV 17-32: Suggested for common street use.

All Megan Racing Exhaust and Suspension products are deemed for “OFF ROAD USE ONLY”

Please note that the measurements provided are from our prototype coilovers in comparison to the test vehicles’ pre-installation suspension, and may not be of actual stock height. These numbers are used only as a reference point from our testing, and may or may not reflect the total capacity of the suspension system. Depending factors are the other various suspension components you may or may not have on your vehicle such as parts that affect toe angle, camber, etc. The coilovers may have a higher adjustment rate due to the test vehicle being pre-lowered rather than OE parts. Any item installed/mounted/used is not returnable.